Staten Island Masonry Contractor

Full-Service Masonry Work Performed by Our Own Licensed Crew — No Subcontractors, No Exceptions

What We Do: Masonry Built for Staten Island

When homeowners and property owners on Staten Island need masonry work done right, they need a masonry company with real skin in the game — a contractor whose own crew builds every wall, sets every stone, and stands behind every joint. That is Island Built Masonry.

We are a licensed masonry contractor serving the entirety of Staten Island, New York. Our work covers the full spectrum of residential and light commercial masonry: brick repair and repointing, block foundation work, natural stone installation, retaining walls, steps and stoops, chimney restoration, and decorative masonry features. Whether you have a crumbling chimney in Tottenville, a failing retaining wall in Great Kills, or a front stoop that has heaved apart after too many NYC winters in New Dorp, we assess it, quote it clearly, and build it properly.

What sets us apart is simple: we do not subcontract. Every person on every Island Built Masonry job site is our own trained employee, working under our direct supervision. No day laborers. No unfamiliar faces. No variation in quality from job to job. This is the only way to maintain the consistency that masonry craftsmanship demands.

Our Masonry Services

Brick Repair and Repointing The freeze-thaw cycle that runs November through March is the most destructive force working against Staten Island masonry year after year. Repeated temperature swings drive moisture into mortar joints, freeze it, expand it, and slowly destroy the watertight integrity of your walls. Island Built Masonry specializes in diagnosing the full extent of mortar joint failure and performing professional repointing to restore structural and weather protection. We also handle full brick unit replacement where individual bricks have spalled, cracked, or shifted beyond repair.

Chimney Repair and Restoration The chimney is the most exposed masonry structure on any home — open on all four sides, at the highest point of the building, and subject to additional thermal cycling from fire use below. Chimneys on Staten Island homes take a beating. We repair deteriorated mortar joints, rebuild crumbling chimney crowns, replace spalled brick units, repoint flashing transitions, and address the cap and top-of-chimney detailing that so often fails first. If your chimney is leaking, staining, or visibly deteriorating, request a free assessment.

Foundation and Block Wall Work Concrete masonry unit (CMU) foundation walls and block construction require specialized knowledge and careful mortar specification. We repair cracked block walls, address moisture infiltration points, and repoint failed CMU joints in basements and foundation perimeters throughout Staten Island. We also perform new block wall installation for additions, outbuildings, and below-grade applications.

Retaining Walls Staten Island’s varied topography — particularly across the hillier areas of the North Shore and parts of the South Shore — creates demand for retaining walls that can handle significant lateral earth pressure while surviving the freeze-thaw cycle. A poorly built retaining wall fails within a few seasons. Island Built Masonry designs and installs retaining walls in natural fieldstone, split-face block, brick, and poured concrete, with proper drainage provisions and footings built below the frost line.

Steps, Stoops, and Entrance Work Front stoops and exterior steps are among the most visible — and most wear-prone — masonry features on any Staten Island home. Heaved treads, cracked risers, loose capstones, and failing mortar joints at step edges are hazards as well as eyesores. We rebuild deteriorated stoops from the foundation up, reset individual treads, replace failing capstones, and repoint deteriorated joint work throughout.

Natural Stone Installation and Repair Fieldstone walls, bluestone walkways, brownstone facade details, and decorative stone veneer all fall within our scope of work. Natural stone installation requires understanding how different stone types behave — thermal expansion rates, moisture absorption, freeze-thaw vulnerability — and how to specify the mortar and setting bed correctly for each. We install new natural stone features and repair or rebuild deteriorated stone work across residential and light commercial properties.

Tuckpointing and Decorative Joint Work Tuckpointing is a specialized finish technique that creates a refined joint appearance — typically a dark-colored mortar background with a thin, raised light-colored fillet line — associated with high-quality historic masonry construction. It requires patience, skill, and the right mortar formulation. Island Built Masonry performs true tuckpointing for restoration projects and for homeowners who want a refined finish on new or repaired masonry.

Waterproofing and Sealant Application Masonry waterproofing is an extension of brick and block repair, not a substitute for it. We apply penetrating silane/siloxane sealants to repaired exterior masonry surfaces where appropriate, and we address the mortar and flashing failures that are the root cause of water infiltration — rather than just painting over the symptom.

Our Masonry Process

Every Island Built Masonry project follows the same deliberate process, whether we are repointing a chimney in Eltingville or building a new retaining wall in Annadale.

Free On-Site Assessment Every project starts with an in-person site visit. We do not give ballpark quotes over the phone for masonry work — the scope depends on conditions visible only on-site. One of our experienced crew leaders comes out, assesses the full extent of the work, identifies any underlying issues that need to be addressed before surface repairs are made (a classic example: repointing a wall above a failing foundation without addressing the foundation first), and discusses your goals and priorities.

Written, Itemized Estimate After the assessment, we provide a written estimate in plain language. Island Built Masonry operates on a quote-based pricing model — all estimates are free, and you will know the full scope and cost before we start. No open-ended time-and-materials billing. No surprise add-ons midway through.

Material Sourcing and Specification The correct masonry material for your project is determined by the construction type, the existing materials on-site, and the application. Using the wrong mortar type on the wrong substrate accelerates failure. We source matching brick from regional suppliers, specify mortar types appropriate to the existing construction (Type S, N, or custom mix depending on application), and select sealants and accessories appropriate to the New York climate.

Professional Installation Our crew performs the work using proper techniques, proper tools, and proper craft. Mortar is removed to adequate depth before repointing. Joints are tooled to match the original profile. Replacement brick is laid in correct bond patterns with proper mortar beds. No shortcuts. No work left for the homeowner to spot-fix later.

Cleanup and Walkthrough We leave the job site clean — debris removed, surrounding areas cleaned of mortar splatter and efflorescence — and do a complete walkthrough with you before the job is marked complete. If anything does not meet your expectations, we address it before we leave.

Why Choose Island Built Masonry

No Subcontractors — Ever This is our most important policy. The masonry contractor who bids your job is the masonry contractor whose crew builds it. Every technician on site is an Island Built Masonry employee, trained and supervised by us. This is the only way to guarantee consistent quality across every job.

Licensed and Insured in New York We are a fully licensed masonry contractor in the State of New York, carrying general liability insurance and workers compensation coverage. Every job we perform meets NYC Building Code requirements. You are protected throughout the project.

NYC Code Compliance Masonry work in New York City — even residential repairs — is subject to building code requirements, particularly for structural work, chimney repair, and work on older pre-war construction. We know the code and work within it. For projects in areas of Staten Island with historic district designations or special compliance requirements, we are familiar with the applicable rules.

Built for the Staten Island Climate Northeastern masonry work requires understanding freeze-thaw mechanics, mortar compatibility with existing construction, and proper drainage detailing to prevent water infiltration before it begins. Our work is designed to survive Staten Island winters — not just to look good when it is installed.

Transparent, Quote-Based Pricing We do not quote low and add-on later. Every estimate from Island Built Masonry is a written scope with a firm price. You make your decision with full information. That is how we operate.

Masonry Contractor Serving All Staten Island Neighborhoods

Island Built Masonry travels throughout Staten Island. No neighborhood is too far, and we do not charge trip fees for outer-island locations.

Our service area covers the full borough including Great Kills, Tottenville, Eltingville, Annadale, New Dorp, Huguenot, St. George, Stapleton, Tompkinsville, Clifton, Woodrow, Rossville, Bulls Head, West Brighton, and all points in between. If you are on Staten Island, we are your masonry contractor.

Frequently Asked Questions

What types of masonry work does Island Built Masonry handle? We handle the full range of residential and light commercial masonry: brick repair and repointing, chimney restoration, block foundation work, retaining wall installation, steps and stoops, natural stone installation, tuckpointing, and waterproofing. If it involves brick, block, or stone on Staten Island, contact us for an assessment.

Do you ever use subcontractors? No. Island Built Masonry does not subcontract any portion of any job. Every technician who works on your property is our own employee, trained by us and working under our direct supervision. This is our standard policy for every project regardless of size.

How long does a typical masonry repair last? A properly executed repointing job — with mortar removed to adequate depth and replaced with correctly specified mortar — should last 20 to 30 years in northeastern conditions. Work done incorrectly, with shallow mortar removal or the wrong mortar type, may fail within a few seasons. This is why hiring a licensed masonry contractor matters.

Do you work on historic buildings and older pre-war construction? Yes. Pre-war brick construction on Staten Island — particularly in St. George, Stapleton, and Tompkinsville — often requires soft, lime-based or lime-rich mortar formulations that are compatible with the original softer brick. Using modern high-strength mortar on soft old brick accelerates spalling. We assess existing construction and specify mortar accordingly.

How soon can I get an estimate? Contact us and we will schedule a free on-site assessment at your earliest convenience. We serve all of Staten Island and accommodate scheduling around your availability. Written estimates are provided following the site visit.

Request a Free Masonry Estimate

Island Built Masonry is Staten Island’s full-service masonry contractor. Licensed, no-subcontractor, code-compliant work on every project.

Contact us today for a free on-site assessment and written estimate. We work across all of Staten Island — from Tottenville to St. George, from Great Kills to the North Shore — and we bring the same standard of craftsmanship to every job.